Post new topic Reply to topic  [ 4 posts ] 
Author Message
 Post subject: FSB scaleing and Bluetooth with Eee PC Tray
PostPosted: Sun May 17, 2009 5:42 pm 
Offline

Joined: Sun May 17, 2009 3:55 pm
Posts: 2
eeePC model: 1000HE
Aurora version: Standard 3.0
FSB scaleing and Bluetooth with Eee PC Tray

Hi,
after all I still have a problem with CPU settings and Bluetooth. I followed instructions posted here in this post and on the wiki for configuering Eee PC Tray (statux) to fix the problems but some issues i can't get working. BTW I've to say that I'm kind of new in linux.

Problems still are:
- When I move the mouse over the systray icon it doesen't show Temp., Fan-Speed etc. like in the screen shot from the wiki from eeebuntu.
cat /proc/eee/fsb still doesn't work, the folder does not exist.
- After a reboot it always starts in ondemand mode and the switch options with the left mouse button on the icon doesn't work, even though I
uncommended the lines in the eeepc-acpi.local:
MODE_AC="performance"
MODE_BAT="powersave"
I have to plug my powerplug first in or out before it reacts. After that the switch buttons work. I check the power mode with the CPU Frequency Monitor.
- Bluetooth doesen't work, but what I heard/read it is a kernel bug?

So what I did:
I followed the instructions at statuxs known issues which are in sum all the stuff I found so far in the net at different places.

My kernel as uname tells me is 2.6.28-12-netbook-eeepc and I've Eeebuntu Base 3.0 installd.
My Hardware is a Eee PC 1000H

Thanks for helping


Top
 Profile E-mail  
 
 Post subject: Eeebuntu 3.0
PostPosted: Sun May 17, 2009 5:53 pm 
Offline
Jupiter Dev
User avatar

Joined: Thu Mar 12, 2009 1:43 am
Posts: 1369
eeePC model: 1000HE
Aurora version: Beta 4.0
Tolo wrote:
FSB scaleing and Bluetooth with Eee PC Tray

Hi,
after all I still have a problem with CPU settings and Bluetooth. I followed instructions posted here in this post and on the wiki for configuering Eee PC Tray (statux) to fix the problems but some issues i can't get working. BTW I've to say that I'm kind of new in linux.

Problems still are:
- When I move the mouse over the systray icon it doesen't show Temp., Fan-Speed etc. like in the screen shot from the wiki from eeebuntu.


I think the screenshot was taken with Eeebuntu 2.0, there is a bug in Jaunty that causes the application to crash when the tooltip is updated either by a thread or timer so it is disabled for now.

Tolo wrote:
cat /proc/eee/fsb still doesn't work, the folder does not exist.
Tolo wrote:

Try:
Code:
sudo -s
apt-get install eeepc-acpi-dkms
echo eeepc-acpi >> /etc/modules


Make sure you use ">>" and not ">".

Tolo wrote:
- After a reboot it always starts in ondemand mode and the switch options with the left mouse button on the icon doesn't work, even though I
uncommended the lines in the eeepc-acpi.local:
MODE_AC="performance"
MODE_BAT="powersave"
I have to plug my powerplug first in or out before it reacts. After that the switch buttons work. I check the power mode with the CPU Frequency Monitor.


The above should resolve this for you.

Tolo wrote:
- Bluetooth doesen't work, but what I heard/read it is a kernel bug?


It was, I'm not sure if it is still a bug though. On the statux wiki in the diagnostics section there is information on debugging bluetooth, run that and email the output to me and I'll be able to tell you for sure.

Tolo wrote:
So what I did:
I followed the instructions at statuxs known issues which are in sum all the stuff I found so far in the net at different places.

My kernel as uname tells me is 2.6.28-12-netbook-eeepc and I've Eeebuntu Base 3.0 installd.
My Hardware is a Eee PC 1000H

Thanks for helping



Hope this info helps. Oh, I see you are on 2.6.28, yes it's impacted by the bluetooth bug.

_________________
[ ~/Blog ] - [ Fuduntu ] - [ Fuduntu Forum ] - [ Jupiter ] - [ Aurora ]


Top
 Profile E-mail  
 
 Post subject: Re: FSB scaleing and Bluetooth with Eee PC Tray
PostPosted: Sun May 17, 2009 7:05 pm 
Offline

Joined: Sun May 17, 2009 3:55 pm
Posts: 2
eeePC model: 1000HE
Aurora version: Standard 3.0
Hi,
thanks for the quick reply.
Is there another kernel-image i could install to get BT working?

Concerning the installation of the dkms package, I had this allready done. The only thing I made different is, that I created a blacklist in /etc/modprobe.d/ ,too. I wrote in the blacklist the module asus_eee. There also was a blacklist.conf in which I didn't wrote the module.
I read this at the statux wiki. Maybe this is the problem. But the module asus_eee is loaded when I check with lsmod.

Edit:
I also did apt-get install --reinstall acpi asus_eee_dkms acpid acpi_support eeepc_acpi_utillities

The folder /proc/eee/ doesn't exist. :(


Top
 Profile E-mail  
 
 Post subject: FSB scaleing and Bluetooth with Eee PC Tray
PostPosted: Mon May 18, 2009 1:49 pm 
Offline

Joined: Sun Mar 22, 2009 7:04 pm
Posts: 67
Location: Utah, USA
eeePC model: 1000H
Aurora version: Standard 3.0
Guitaraholic mentions in another thread that they are working on bringing the new kernel to us so we have to wait until then.


Top
 Profile E-mail  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron